GENII DPI 620 AND DPI 620IS
Our Elite range of GE's Druck DPI 620 Genii Series are easy to use, rugged, and highly accurate multifunction instruments for calibrating & maintaining process instrumentation. Its modular design and functionality means it can be expanded over time and tailored to applications as needs change. With options that include HART® / Fieldbus / Profibus communications, it’s our most powerful, simple to use and highest accuracy calibrator. Now available with ATEX and IECEx approval for use in zone 1 and zone 2 classified hazardous areas.
DPI 611 Handheld Pressure Calibrator
Robust and easy-to-use - GE's Druck DPI 611 Pressure Calibrator from our Expert range.
Generate pressure in seconds with the robust, easy-to-use Druck DPI 611 pressure calibrator from GE's Expert range. The ergonomic, hand-held device provides the best-in-class accuracy, with easy-to-use features, including an intuitive menu that recalls favorite tasks and documents data. With a touchscreen interface and a large color display, the rugged calibrator provides twice the performance in a product half the size of its predecessor.
700HPPK PNEUMATIC TEST PUMP KIT
The Fluke 700HPP High Pressure Pneumatic Test Pump (the Product) is a portable device that produces precise pressures up to 21 MPa (3000 psi). The 700HPPK (the Kit) includes the Product and a High Pressure Calibration Manifold (HPM) with hose.
700HPPK PNEUMATIC TEST PUMP KIT
The Fluke Calibration 7109A and 6109A Portable Calibration Baths (the Product)
accurately calibrate a variety of temperature sensors. The bath fluid volume is
large enough to immerse up to four 38 mm (1.5 inch) flanged tri-clamp probes and
a reference thermometer. The 7109A tests the temperature range of -25 °C to
140 °C. The 6109A covers the temperature range of 35 °C to 250 °C. Traceable
NVLAP accredited calibration is included. Models that equipped with the Input
Module can also measure an RTD, thermocouple, or 4-20 mA transmitter and a
reference PRT. This functionality makes the Product a complete calibration
solution.
7250LP Low Pressure Controller/Calibrator
The 7250LP low pressure digital pressure calibrator, part of the versatile Series 7250 family, is specifically designed to meet the demanding performance requirements of calibrating low pressure sensors, transducers, mechanical gauges, portable calibrators and their plug-in modules.
To accommodate bidirectional devices, the 7250LP can be supplied to operate in both positive and negative gauge modes. The 7250LP offers unmatched performance and enhanced control stability.
300 - Quarter-Turn Stainless
The Rotork Gears Series ‘300’ quarter-turn gear operators are the first of their kind to use metal forming technology in their manufacture. This technology dramatically reduces manufacturing costs and allows the operator to be produced from stainless steel.
View Product
SPI Smart Position Indicator
The Smart Position Indicator is designed for use in chemical, petro-chemical, oil and gas industries, power plants and water supply.
Limit switches enclosed in a IECEx/ATEX certified protective enclosure provide an accurate and reliable Open/Close signal to the control room for multi-turn manual valves. Using 30+ years of proven technology, the new Smart Position Indicator mechanically displays the position of the valve for in-field notification and digitally signals its open/closed position.
View Product
W100 - Shaft Direction Changing
The W100 gearbox has been designed primarily to be used on AB and manual duty IW series gearboxes to change the input shaft direction by 90° for underground applications.
View Product
BOD Merc-Free Analysis Sensor
Innovative electronic pressure measuring system for BOD determinations using manometric technique.
Biological Oxygen Demand (BOD)
Biological Oxygen Demand is the amount of oxygen used by micro-organisms when they bio-degrade organic material in a water sample. It is used as an important measure of the degree of contamination in a supply. The conventional BOD system comprises 6 bottles and 6 mercury capillary tubes with a constant scale of up to 1000mg/L. This allows exact and error free readings of the BOD value to be read directly in mg/L or to be calculated by single multiplication.
Cyanide Meter
Cyanide is a pollutant that originates mostly from metallurgical and galvanic industrial plants and is extremely poisonous to the human nervous system. It is therefore imperative to monitor and control its level in potable water.
CHANGE GASKET
Incredibly robust and resilient, metal-wound Change heat exchanger gasket is designed to deliver the most dynamic seal ever. Manufactured with proprietary equipment, using a 5-times thicker metal spiral and a unique laser welding process that penetrates completely through.So it requires no inner or outer ring, and is as easy to handle and install as a double-jacketed gasket. Best of all, it’s proven to perform without fail at least 60% longer than any other heat exchanger gasket, spiral wound, double jacketed, CMG, or Kammprofile, and that is a game changer.
SPIRAL WOUND GASKET
The Flexitallic spiral wound gasket is the precision-engineered solution for flanged joints, heat exchangers, boiler handholes, manholes, and other high-temperature, high-pressure applications—providing resistance to virtually every known corrosive and toxic element.
ClydeUnion Pumps Isoglide range
The ClydeUnion Pumps Isoglide range of horizontal long coupled or close coupled ISO 2858 standard pumps is an established end suction design range
CUP-FK - Multi-stage barrel radially split pump
MULTI-STAGE CENTRIFUGAL
CUP-FK, a radially split, barrel case, multistage diffuser pump designed for high pressure.....
1750 Series pilot operated poppet valves
Midland-ACS range of 3/2 pilot operated poppet valves in Stainless Steel 316L for use on gases.
View Product
1750 Series pilot operated poppet valves
Midland-ACS range of 3/2 pilot solenoid operated poppet valves in Stainless Steel 316L for use on gases.
View Product
MV & HV TEFC Induction Motors
MV & HV TEFC motors are commonly used in the petrochemical, power generation, mining and general purpose process industries for various applications including pumps, blowers, compressors, crushers, and conveyors.
These induction motors offer lower weight and inertia advantages. These properties lead to higher reliability and more robust performance.
View Product
X$D Ultra® 841
IEEE 841 X$D Ultra® motors meet or exceed the IEEE 841-2009 standard. With an advanced bearing system and class H inverter duty insulation, a test report of each motor to ensure performance, five-year warranty, and all the advanced features that come standard, the X$D Ultra 841 is one of the most durable and reliable motors you can buy.
View Product
TransPort PT878GC Portable Ultrasonic Gas Flow Meter
The Panametrics TransPort PT878GC brings clamp-on ultrasonic gas flow metering capability to the portable level. Designed for short-term flow survey work for natural gas pipelines, compressed air, inert gas or any compressed gas applications, it has the ability to measure gas flow rates, log data to internal memory and export flow data to a PC. It is especially useful for metering of erosive, corrosive, toxic, high-purity or sterile gases or in any application where penetrating the pipe wall is undesirable.
PanaFlow Z3 Ultrasonic Liquid Flow Meter
The PanaFlow Z3 is the latest of a new generation of Panametrics ultrasonic flow meters. It is a three-path wetted meter designed specifically for dependable, accurate and repeatable flow measurement of process liquids. With a sleek industrial design and ultra-reliable electronics, it provides a top-of-the-line choice for process and industrial applications.
AquaTrans AT868 Ultrasonic Liquid Flow Meter
The Panametrics AquaTrans AT868 ultrasonic liquid flow meter is a rugged, low-cost transmitter package that can be installed right at the process measurement point. It is designed specifically for municipal applications such as water, wastewater and sewage. Setup and service can be done via the transmitter’s internal keypad or by connecting the AT868 to a laptop PC and using BHGE's instrument interface software. Accuracy is typically 1% to 2% of reading with clamp-on transducers, and better than 1% with wetted transducers.
DigitalFlow™ GC868
Historically, clamp-on flow metering was limited to liquids because existing methods could not work on metal pipes containing gases. Several years ago GE developed a new technology that extends all the benefits of clamp-on flow metering to gas measurement. This breakthrough clamp-on gas flowmeter technology has continued to improve, resulting in the second generation of the DigitalFlow GC868 flowmeter. This
remarkable ultrasonic flowmeter works with gases at high or low pressure in pipes made of metal and most other materials.
Sentinel LCT8 Ultrasonic Custody Transfer Liquid Flow Meter
In industries where measurement stability is critical to reliability and performance, the Sentinel LCT8 delivers peace of mind performance. Used primarily to measure hydrocarbon liquids and water in critical use applications, Sentinel LCT8 uses eight ultrasonic paths to achieve stable, reliable measurement, even in turbulent flow conditions typical in midstream applications. The Sentinel LCT8 design provides a stratified field that cancels effect of swirl and disturbances caused by viscosity changes or installation effects.
Bently Nevada Case Expansion and Valve Position Transducer Systems
GE Bently Nevada offers a very wide variety of vibration, position, speed, pressure and power sensors and transmitters, each designed to handle the rigors of industrial environments and many capable of being installed in hazardous areas when appropriate I.S. barriers, galvanic isolation, or other means are used.
DF-300E Delta F Series Oxygen Analyzer/Sensor
The DF-300E family of oxygen analyzers provides access to accurate, sensitive and rapid oxygen analysis and flexibility across the broadest range of applications. For more than three decades, the heart of Delta-F oxygen analyzers has been a unique, coulometric sensor - the ultimate in sensitivity.
This long term reliable sensor uses a non-depleting, ambient temperature oxygen reaction to produce a current flow that is precisely proportional to the number of oxygen molecules reduced at the cathode.
PACSystems* RX3i 330 CPU
The PACSystems* RX3i controller provides the foundation for Industrial Internet connectivity. It is a powerful, modular Programmable Automation Controller with a focus on high availability. The RX3i features a single control engine and a universal programming environment to provide application portability across multiple hardware platforms.
With integrated critical control platforms, logic, motion, HMI, process control and high availability based on GE Reflective Memory technology, RX3i increases system performance and flexibility.
RX3i CPX 400
The PACSystems* Rx3i CPE 400, part of GE’s Industrial Internet Control System, is a hypervised, multicore, outcome optimizing controller. It is now possible to combine real-time deterministic control with physics-based analytics to securely connect to, easily collect, and analyze industrial data directly at the machine. Controls can now be programmed to dynamically influence business outcomes, generate new forms of revenue, and improve profitability. It is designed for superior performance in applications including water & wastewater, metro, industrial steam, oil & gas, discrete manufacturing, modular machine design and other diverse applications that require a compact footprint combined with high performance, flexibility, and reliable, application specific control.
GAS METERING SYSTEM
Systems Whichever technology you prefer, whatever your budget and whatever the application, our engineers have the knowledge and experience to deliver high accuracy gas metering packages to suit your needs.
HYDRAULIC CONTROL SYSTEMS
Specialising in hydraulic, pneumatic and electrical control systems we have an expert team of multi-disciplined engineers to support clients with integrated solutions around the world. Trading in the Middle East as Alderley, our work ethos of technical excellence originates from a wealth of experience and global successes achieved from our United Kingdom facilities (SMS) in Great Yarmouth and Aberdeen.
Fluke 233 Remote Display Multimeter
The Fluke 233 remote display digital multimeter allows you to be 30 ft away from the measurement point with the innovative wireless display. With the 233, you can perform two man jobs alone and remove the hazard from the job.
Fluke 289 True-rms Industrial Logging Multimeter
with TrendCapture
New diagnostic functionality for maximizing productivity in the plant. The new 289 is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off solving other problems.
mentor visual iq videoprobe
Welcome to a new era in precision, productivity and portability. GE’s Mentor Visual iQ Video Borescope with 3D Measurement puts the power of state-of-the-art point cloud measurement and analysis in your hands. Mentor Visual iQ delivers processing capability you need to speed inspections and increase probability of detection - all in a portable yet rugged design. With InspectionWorks Connect, inspectors can collaborate in real time, providing expertise anywhere in the world.
DigitalFlow XGF868i Ultrasonic Flare Gas Mass Flow Transmitter
The Panametrics DigitalFlow XGF868i is a low-cost, compact, and explosion-proof/flame-proof transmitter version of the Panametrics DigitalFlow GF868 flare gas mass flow meter. The XGF868i not only improves the efficiency of petrochemical plants, refineries and offshore platforms, but is used to conserve energy and reduce product loss by identifying sources of leaks into flare systems. It also improves compliance with pollution control regulations and reduces energy usage by accurately controlling the amount of steam fed to the flare tip
DigitalFlow GF868 Ultrasonic Flare Gas Mass Flow Meter
BHGE's Panametrics GF868 flare gas mass flow meter improves the efficiency of petrochemical plants, refineries and offshore platforms. It uses a proprietary algorithm to determine instantaneously the molecular weight and mass flow rate of the flare gas. The meter is used to conserve energy and reduce product loss by identifying sources of leaks into the flare systems and by accurately controlling the amount of steam fed to the flare tip. It also helps improve compliance with pollution control regulations.
Bently Nevada Vibration and Thrust Transmitters
GE Bently Nevada offers a very wide variety of vibration and thrust transmitters, each designed to handle the rigors of industrial environments and many capable of being installed in hazardous areas when appropriate means are used.
The 990 Vibration Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors or small pumps, motors, or fans who prefer to provide a simple 4 to 20 mA proportional vibration signal as the input to their machinery control system.
Bently Nevada SCOUT & vbSeries Portable
Vibration Analyzers
GE's SCOUT and vbSeries portable vibration analyzer instruments are built to robust professional standards, making them the first choice for numerous leading companies around the world. Featuring GE's powerful, condition monitoring software, this tiered instrument range varies in features and price, enabling you to select the model with the set of features you require. SCOUT models are certified for an ATEX Zone 2 hazardous rating, whereas the vbSeries models are rated for CSA Class 1, Division 2.
Bently Nevada 2300
GE's Bently Nevada 2300 Vibration Monitor Series provides cost-effective vibration monitoring and protection capabilities for non-critical machinery. It is comprised of the 2300/20 and 2300/25 monitors that are specifically designed to provide continuous monitoring and protection for Balance of Plant equipment.
With System 1 Evolution connectivity, The 2300 Vibration Series Monitors enable condition based maintenance of assets in a wide range of industries including: Oil & Gas, Power Generation, Water Treatment, Pulp & Paper, Manufacturing, Mining, Cement, and other industries.
Bently Nevada 3500
GE's Bently Nevada 3500 Monitoring System provides continuous, online monitoring suitable for machinery protection and asset condition monitoring applications. It represents our most capable and flexible system in a traditional rack-based design and offers numerous features and advantages not provided in other systems.
Ranger pro
The wireless sensor Ranger * Pro allows you to measure vibration velocity, vibration acceleration and temperature. The sensor is intended for operators of installations in the field of power generation, oil and gas industry and in similar industries.
Calibrators
Gearboxes
Water Testing
Gaskets
Pumps
Valves
Electric Motors
Flow Meters
Speed and Temperature
Automation Controllers
Metering Systems
Multimeter
Flare Gas
Condition Monitoring & Vibration
Products
Head office – Lagos, Nigeria
15 Ogundana Street, Off Allen Avenue, Ikeja, Lagos, Nigeria.
Telephone:
+234 809 390 6262
+234 909 026 0055
Fax: +234 1 3450598
Ghana
Appiawah House, Plot CS 02,Parakuo Estates, Spintex Road, Nungua, Accra.
Telephone:
+233 246685732,
+233 303404452
Port Harcourt
Plot 29A, Elelenwo Street, GRA Phase I, Port Harcourt.
Telephone: +234 84 901022
Connect with us: